关闭选单
风扇产品

技术支援
Noise Level Data|噪音指数

The Measurements of noise levels are made in accordance with CNS 8753 (which is very close to DIN 45635) ,which is being tested in a sound proof chamber with a sound level Lp<15dBA. A elastic mounts supported microphone is placed 1 meter from the center line of the fan during the test. The fan is running without any resistance to airflow.

测量噪音箱是根据 CNS8753(非常接近 DIN45635),在一个 LP<15dBA 的无回响室中测得,置换一个收音器在一个可伸缩性的平台上,距离风扇 1 米的中心线上来测量,风扇是在一个无阻力的条件下运转。



Sound Pressure Level(SPL) is environmentally dependent and is defined as SPL=20log10p/Pref,
and Sound Power Level (PWL) is defined as PWL= 10 log 10 W/Wref……
音压指效主要是由SPL=201p910p/Pre定义,音量指效主要是由PWL=1010g10w/Wref来

P=Pressure    压力
Pref=A reference pressure   参考压力
W=Acoustic power of the source   音响来源能量                                                                                   
Wref=An acoustic reference power   參考音响能量               



Fan noise data is usually plotted as Sound Pressure Level against the octave frequency bands.
风扇的噪音数据通常是由音压指数对比频率来纠正的
 
 MTTF和 L10之計算方法:

1. 依據風扇SPEC承認書,找到相對應的期望壽命標準。
 如:SPEC: 5-1-13 Life Expectancy(L10) 75,000 Hours At40℃(Bearing) 

2. 計算方法:依據Weibull分佈方程
L10:信賴度90%之期望壽命
MTTF: 平均無故障時間
MTTF=7xL10   
Ts: 試驗溫度(Test  temperature)
Tu: 預換算溫度(Pre-conversin tempera ture)
AF:加速因數(Acceleration Eactor)  
AF=1.5Λ ((Ts-Tu)/10)(溫度每升高10℃壽命減1.5倍)

T1:所需測試時間(Required test time with zero failure)
n:測試數量(Quantity of Test Devices)
Βr;c: 信賴水準(Confidence Level)依據GEM表90%,其零失效(Zero Failure)值=2.3026

 
GEM表(Generalized Exponential Model Table)
信賴水準(%) 失效數
  0 1 2 3 4 5 6 7 8 9 10
90 2.3026 3.8897 5.3223 6.6808 7.9936 9.2747 10.5321 11.7709 12.9947 14.286 15.4066
T1= 1.036 × MTTF × [ ( Βr;c ) / n ] Λ 0.91 ÷ AF

T2: 實際測試時間(Actual test time with zero failure)
(T2實際測試時間>T1預期所需時間風扇判定合格,則代表風扇壽命OK)


溫度換算公式:


T3:預期溫度  L:預期壽命  Tu預換算溫度  L1:預換算溫度對應的壽命
L1=L/1.5Λ ((Tu-T3)/10)
例:預期壽命:溫度40℃   75000H,換算60攝氏度情況下壽命:
L1=75000/1.5Λ ((60-40)/10)
=75000/2.25
=33333H


3. 範例:
3-1. 根據公式計算出溫度40℃的環境下,MTTF期望壽命。
MTTF=7XL10=7X75000=525000 hours

3-2. 根據加速因數AF公式計算出測試溫度75℃的條件下,換算40℃的AF值。
AF=1.5 Λ ((Ts-Tu)/10)= 1.5 Λ ((75-40)/10)= 1.5 =4.13

3-3. 根據公式計算出在溫度75℃的條件下,需要測試多長時間(T1),能滿足風扇在溫度,40℃的環境下使用,L10能達到期望壽命。
T1= 1.036 × MTTF × [ ( Βr;c ) / n ] Λ 0.91 ÷ AF
=1.036×525000×(2.3026/100) ÷4.13
=4255 hours


3-4. 在溫度75℃的條件下,測試的實際時間(T2),換算溫度40℃的環境下,MTTF和L10時間。
例:75℃  實際測試時間4272hours
MTTF=T2/(1.036x [ ( Βr;c ) / n ] Λ 0.91 ÷ AF)
=4272/(1.036 x(2.3026/100) ÷4.13)
=527196hours
L10=MTTF/7=527196/7=75314hours